Lure Information
This article first appeared in the
Lure Angler magazine.
You may also have seen it on
www.anglersnet.co.uk
. Many thanks to Elton Murphy for permission to reproduce it here.
Home-rolled Lure Fishing
By Leon Roskilly
The stick float bobbed and twisted in the current where the tiny river
Len empties over the weir into Mote Park Lark, in Maidstone. Weeks
before, I had watched the bream as they spawned in the current. Now a
shoal of perch were feeding, attracted by the hatching fry. Suckers for
a stick floated worm.
The float dipped and another
fish was hooked, not big. Like most of the others around 6 ounces, with
the odd fish to ten ounces amongst them. Beautiful fish with green
sides and flaming red fins but to tell the truth, I was getting a
little bored.
I rummaged around in my tackle
bag, searching for the box containing the few lures and spinners which
I had collected over the years. Like many anglers, I kept such a
collection. Maybe, when I was pike fishing and couldn't catch live
bait, and the deadbait ran out, I could always try a lure - but I never
did.
I took off the stick float and attached a trace and spinner (This was probably the biggest mistake of my life!).
I flicked the spinner out into
the current and started the retrieve. Wham! The rod went round and the
line shot off to one side. Soon another perch, not much different to
the others I had caught, graced my landing net. This time though my
hands were shaking as I removed the hooks. Another cast, another fish.
I couldn't believe the power of these fish as the hit the spinner, or
the ferocity of the fight they put up.
I didn't know it then but,
looking back, it was really me who was getting firmly hooked. After a
while, I thought a move to another swim might bring success of a bigger
kind and started out roving - another education. As I went from swim to
swim, visiting parts of the lake I had never fished before, I
discovered just how much there was to learn about the water. I saw huge
carp cruising, miles from where the carp boys had their pods set out; I
got to chat to other anglers who really knew the water, I found swims I
never knew existed.
Finally, as a spinner flashed
within a few feet of the bank, I experienced that heart stopping moment
that is the addictive thrill of lure fishing. A jack shot out from the
weed, hit the spinner, twisted against the strike, sending up a shower
of spray, and was gone.
Legs like water, and hands
trembling, I cast again. Hardly daring to breathe, I watched as the
lure came toward the bank. My heart stopped again as I saw the
following shape. The rod went over and that was the end of my
stick-float fishing. It was also the end of legering with luncheon meat
for chub and the end of warm summer evenings waiting for the tench to
stir. A whole collection of rods, reels, floats, keepnets etc., reduced
to dust-gathering shapes in the garage.
I was a lure-fisherman, I was obsessed, and I was broke.
How could I afford to spend
seven to fourteen pounds on a single lure, only to lose it after a few
casts on some hidden snag (there are a lot of those in the waters I
fish).
Now, I know that most of you lot
reading Lure Angler, hardly ever lose lures. Years of experience has
perfected your casting technique so that you can drop your lure safely
within centimetres of that bush on the far bank (just like me - ho ho
ho!). You have developed that sixth sense that just tells you when a
swim contains a shopping trolley, motorbike or missing airliner. If the
worse comes to the worst, you have developed techniques to retrieve
lures from sunken forests (60lb braid, and soft wire hooks help). Or
you are rich enough not to care.
But I was a complete novice, with three teenage children, three cats, three guinea pigs and a rabbit to support.
Now I'm no handyman - just ask
my wife and three teenage children (the rabbit appreciates the run I
made - it escapes quite often), but it occurred to me that I could make
my own (then I wouldn't mind losing them so much - ho ho ho!). After
all, a lure is just a bit of wood with hooks stuck in it, isn't it?
A bit of research amongst my
local DIY stores and tackle shops convinced me the project was
feasible. I purchased a length of ¾ inch beech doweling (broom handles
work out cheaper), hooks, split rings etc. A bit of work with a
wood-rasp and I soon had a basic shape, which I thought might work. I
wanted to test it for action before finally fixing the hooks properly
and before painting it, so it was a fairly rough effort that I cast out
on my next trip.
I chose the swim near the locks
on a local river, where the water was crystal clear. The thought did
cross my mind that a pike would have a go whilst I was testing it out
(I sometimes convince myself that I'm going to win the lottery). Still
a bit unsure, about the safety of the hook fixings, I gave it a go.
It performed perfectly. Running
about 2 - 3 feet deep, it wiggled back toward me. Impressed, I just had
to give it another go. As it came toward the bank, I saw a shape detach
itself from the weed, and head toward it. "Crikey!" I said (or
something like that). "A bloody great pike!" except the back half was
missing?
The shape hit the lure 3 times,
from the side, without hooking up, then swum off up-river. It was then
that I saw the stripes of the biggest perch I've ever seen.
Now it's hard to describe my
feelings at that moment; surprise, a tinge of relief that I had not
left insecurely fixed hooks in a pike, shock at seeing such a huge
perch (it really was something), but most of all the thrill one gets
from having fooled a fish with the craft of my own hands.
That is the almost indescribable
pleasure one gets from 'rolling your own'. It starts on a day, maybe
when the weather is just too horrible to go fishing, or maybe a hot
summer's day, when it's too hot.
You take a piece of wood and
begin shaping it, and, as it takes shape, you start to picture how it
might fish. How deep will it go? Will it wiggle, or veer from side to
side? Will it fish best fast or slow? On a miserable day, with rain
lashing at the window, you're suddenly on the bank, working a lure
among the lilies, casting beneath the alders on the far bank. You start
to think of a colour scheme for the piece of wood, now beginning to
look like a lure. Green and silver? Chartreuse? Fire-Tiger? (Usually
it's botched up finger blobs but hey, the fish don't seem to mind).
Soon it's time to try it out for
real. Now comes a new thrill for the home made lure maker. That first
cast and retrieve. Time spent getting to know the lure. Every lure you
make will be different (at least mine are!). No matter that you are
trying to recreate a past pattern, each lure has its own individual
quirks. The only way to discover a lure's potential is to fish it.
Retrieve it fast, retrieve it slow, jerk it, try long fast sweeps,
discover all of it secrets and sometimes a few surprises too.
Talk to people who love
machinery, old steam engines, and wood and fabric aeroplanes. Get them
in the right mood (it sometimes takes a pint or two) and they'll start
talking about the 'soul' of the engine, they go misty eyed and start
telling stories about unexplainable events. Well, home-made lures are a
bit like that.
Now, it's not my intention to
undermine the lure manufacturing industry, or to destroy the livli-hood
of those who sell their wares. Many commercial lures are made to
extremely high standards. When every lure is individually tested and
balanced, when real experts have designed the shape, action and
balance, you have a fish catching instrument worth every penny. When
you buy these marvels from expert lure-anglers, prepared to spend time
giving advice and encouragement, like Sue from Harris Angling, or Andy
Lush from the Friendly Fisherman, or maybe your own local tackle
dealer. You are getting a service and product second to none, for a
very reasonable cost.
However, there is something
about a lure made by yourself that cannot be equalled. When you have
spent time thinking about the design, shaping it, colouring it, working
out how it fishes, catching fish with it, sometimes a relationship
starts to develop. The lure starts to take on its own personality.
I have one lure, I believe,
which actually loves catching pike! I have cast and retrieved the lure,
maybe hundreds of times. I can tell when a pike is following it, even
in really murky water - honestly. I can feel the thrill coming up the
line. Cast after cast, the lure retrieves straight as a die, giving its
characteristic wiggle. Yet in crystal clear water, I've seen it
suddenly veer toward a patch of weed, or some other feature, give a
cunning wiggle, and be nailed instantly by a hidden pike I never
suspected was there. No commercial lure ever does that!
I have another lure that's
absolutely terrified of pike - but that's another story! So, how to
'roll' your own lures. I guess a lot depends upon how ambitious you are
and how good you are at DIY. The possibilities are endless, but even
the simplest home-made lure will catch fish - in-the right hands. The
sketches with this article (done by my non-fishing, cycling-mad son
David Roskilly - aged 14) show a simple pattern, easy to make but very
effective.
Take a piece of broom handle, 6
- 8 inches long. Use a wood-rasp to file down the ends to the shape
shown. Sandpaper until smooth. Use a pointed instrument to pilot holes
for the screwed-eyes (obtainable from good hardware shops). Be careful
when screwing these in, as it is easy to shear them in half (To avoid
fixing hooks with a weakened screw). I use a different screwed-eye to
pilot the thread into the wood. For additional safety, I stuff the
screw-hole with Araldite before final fixing). Paint the lure with
acrylic paint (don't worry if not too neat, pike don't mind), and use
split rings to fix the hooks and swivel.
If a lure doesn't work right first time, you can reshape it (I carry a
penknife for bank-side modifications), add weight (strips of lead used
to give windows that old-fashioned look are good - obtainable from most
glaziers), or repaint it.
If you want to change lure
colour during a session, coloured tape can be effective, and acrylic
paint takes moments to dry (after all I used to repaint my floats as
the light changed, why not my home-made lures?). If you want a lure to
go deeper, try adding weight to its nose. Add weight to the tail to get
it to stay up on the water.
Don't be afraid to experiment,
even if you mostly use commercial lures you'll learn a lot. But be
prepared for heartbreak. We have all experienced that deep sense of
loss when a favourite lure, costing many pounds has stopped dead in the
water, and no amount of cunning, or persuasion, or prayer will release
it from the grip of the lure monster, hidden in the depths. That's
nothing to the feeling you get when an old friend, crafted by your own
hands, part of a fish catching team, finally hooks up on something
hidden in the depths. When you hear the line crack, and the rod lies
dead in you hand, believe me, you'd willingly sacrifice the most
expensive lure you have to get it back - welcome to the ranks of the
'home-rolled' lure fanatics.
|